Bucket elevator
Bucket elevator, also called an elevator for processing materials, is a conveyor equipment, which automatically raises raw materials from a lower position to high. tanks for fermentation of organic fertilizers. Usually, bucket elevators are used to transport powder, granular and small block materials in a vertical or inclined position (Over 70 °). He can not only raise ordinary powder and fine -grained materials, but can also raise materials with a high grinding ability. A few requirements are presented to the type of material and characteristics.
The bucket elevator mainly consists of the case, traction parts, bunker, drive wheel, reversible wheel, stretch device, guide device, loading port, unloading port and t. e. for you. When you work for you, The work is smooth and reliable, and the service life is long.
Its drive power is small, He uses the supply feed, induction unloading and tightly located bunkers of large capacity. In the process of lifting the material, there is almost no phenomenon of return and digging, Therefore, reactive power is less. The design of the entire machine provides less dispersion of materials during the supply and unloading process, which reduces mechanical wear and extends the life of the equipment. Compared to ribbon conveyor, This is the best choice for vertical transportation of materials to high places.
What kind of bucket elevators can you choose in our company?
Bucket elevators, produced by our company, can be divided into bucket elevators with a ring chain, Bucket elevators with a plate chain and bucket elevators with a tape chain in accordance with various traction methods. Can satisfy your various needs.
You can choose a bucket elevator, which is suitable for you in accordance with various transported materials.
· Chain bucket lift.
Chain bucket lift is a widely used lifting machine. He accepts gravity loading and gravitational unloading. It can be used to transport low ambitious powder, granular and small -block materials with an bulk density less 1,5 T/m³ for you. Lifting height can reach about 50 m, And the temperature of the material should be lower 250 °C.
· Bucket elevator strip.
The tape bucket elevator uses a centrifugal unloading and loading for you. Suitable for vertical lifting powders, Gran, small particles and other bulk materials, not suitable for transporting materials with high abrasiveness. He can reach the height of the rise 40 meters for you, but the temperature of the material cannot exceed 60 ° C.
· Bucket elevator with a plate chain.
Bucket elevator with a plate chain – This is a new type of lifting equipment. Use a hybrid or gravity discharge for you. It is suitable for vertical transportation of powdered, granular and block materials, as well as for lifting materials with high abrasive performance. Its temperature requirements for materials usually do not exceed 250 ° C, and the height of the rise can reach 40 m.
How bucket elevator transports materials?
Is the supply of bucket elevator rational or not, Generally speaking, You need to consider two aspects: one - filling factor, another - feed resistance. How we all know, The less feed resistance, the better, but the filling factor is not necessary than, the better. The feeding is reasonable, In fact, The content of the filling is appropriate, And the resistance of feeding is small.
Methods for feeding bucket elevator, grain used in the workshops, oil and feed factories, Turn on the feed forward, Submit back and feed in two directions. What method of submission should you choose, should be based at speed. When the speed of the lifting tape and the flow rate of the material, when the material enters the base of the machine, relatively small, The feedback is usually used, which is useful for improving the filling factor. If the speed of the lifting tape is greater, than the flow rate of the material, when the material enters the base of the machine, In this case, you can use the feed forward. If the filling factor is not so easy to achieve the required value, then you can use a bilateral feed.
The choice of these feeding methods, more likely, will be determined by your technological process and process diagram.
What factors will affect the resistance of the bucket elevator when serving?
According to our resume, We can conclude, that appropriate factors, affecting stability, The following two aspects are mainly included.
The bucket of the bucket elevator is at the base of the car and works for you during loading. On the one side, its feed resistance is manifested as friction between the material and the bucket, friction between the material and the inner wall of the bed, friction between material and material. On the other side, This is the driving force of the bucket on the material. They are both proportional to the distance, which passes the bucket through the material.
When the bucket elevator works for you with the back, Part of the material is loaded directly into the bucket. Thus, The material affects the bucket. If the speed of the lifting tape and the flow rate of the material, when the material enters the base of the machine, more, then your material will have a greater impact on the bucket, which accordingly will increase the feed resistance.
In short, The less feed resistance, Moreover, the supply of bucket elevator will be rational.
What are the characteristics of our bucket elevator, which make you buy our bucket elevator?
Principle and processing method, which we have developed for the bucket elevator, Provide the reliability of the whole machine, Thanks to it, it works more reliably 20 000 hours.
The bucket elevator is equipped with a high -loading capacity hopper, and when raising the material, there is no phenomenon of return and digging. The average increase in transportation performance for you per hour can achieve 30 subject, The increase in the rise is high, And the productivity of transportation is great.
Bucket elevator uses a completely closed cover, to guarantee the lack of dust in the process of lifting and transportation, as well as ensure environmental sanitation and the lack of pollution of the entire rise and transportation process for you.
Buying a bucket elevator, How do you choose its main components?
- The choice of length: You need to choose the right length in accordance with the height of the lift lifting. Usually, Loosen the fixing part of the tail wheel and raise it to the upper position (to minimize the distance between two wheels) And measure the length.
- Choosing a bucket belt model: Choose a suitable model of a bucket belt depending on the height of the rise, front and rear wheels, characteristics of the material and carrying capacity. Usually, You need to go through detailed calculations.
- Bucket belt length = 2* (Distance between head and rear wheels) + The diameter of the head wheel.
If you find it troublesome or not, How to choose, You can contact us, And we will help you choose.
How do you serve the bucket elevator with daily use?
Ensure the uniformity of feeding and prohibit a sharp increase in the amount of feeding. And the amount of feed should not exceed the lifting capacity, Otherwise, your materials will accumulate at the bottom, which will lead to an accident of a "stuck car". Before each stop, it is necessary to empty all the bunkers. When chains and bunkers are strongly worn or damaged, They must be replaced in the shortest possible time.
If you want to know more about bucket elevator and about, how to choose a bucket elevator, which suits you, You can contact us, Using the following information, And we will provide you with professional information.
