Solid-liquid separator machine
Effectively process and separate solid and liquid particles from various raw materials.
Choose a design based on the properties of your raw materials
The page saves both existing separator types and displays the differences immediately after the first screen.
Spiral separator
Suitable for raw materials with high water content, larger particles and low viscosity. Provides stronger hydration.
Separator with inclined sieve
Suitable for fine particles and more viscous materials. Uses vibration and gravity for continuous separation.
How a spiral separator separates solid and liquid particles?
Submersible pump feeds wastewater into screw extrusion separator. The auger then moves the material to the front of the machine. The pressure gradually increases, and moisture is squeezed out through the mesh screen and discharged through the drainage pipe.
The equipment works continuously. Discharge speed and moisture content can be adjusted by counterweight. Excess material is returned to the original tank through the overflow pipe.
| Type | Performance | Power | Dimensions |
|---|---|---|---|
| SXTS-180 | 10–15 m³/h | 4 kW | 1850 × 650 × 1150 mm |
| SXTS-230 | 15–20 m³/h | 5,5 kW | 1850 × 800 × 1150 mm |
How an inclined sieve separates solid and liquid particles?
The mixed material flows evenly onto the inclined surface of the screen. The vibrating device forces the material to continuously move across the mesh.
The liquid phase passes through the screen holes and flows down to the lower outlet. Larger solid particles remain on the surface and gradually move towards the discharge edge.
| Type | Performance | Power | Dimensions |
|---|---|---|---|
| SXTSX-800 | 15–20 m³/h | 4 kW | 1700 × 1500 × 1300 mm |
| SXTSX-1200 | 30–40 m³/h | 5,5 kW | 2200 × 1500 × 1700 mm |
Inclined sieve or spiral type?
The four selection criteria are presented on separate cards, so that the buyer quickly understands the differences.
Applicable raw materials
Inclined sieve - fine and viscous particles. Spiral type - high humidity and larger particles.
Effect of dehydration
Spiral type usually produces drier solids. Inclined sieve ensures gentle and efficient separation.
Construction
Inclined sieve is easier. Spiral design is more complex, but creates higher spin pressure.
Processing volume
Spiral type works well with large volumes. Inclined sieve is effective for finely divided raw materials.
How to Increase Separation Performance?
You can build in front of the septic tank Pond-Socialist volume 30–40 m³. The top overflow directs the thinner manure further, and thicker material settles at the bottom. After this, the unloading speed of the separator increases noticeably.
The equipment occupies a small area and can operate normally in a room of about 15 m².
How to use solid and liquid phases?
Existing information on the use of cow manure is grouped into four clear areas.
Direct fertilizer
Dehydrated material has less odor and viscosity and can be used as organic fertilizer.
Litter
After suitable treatment, the solid phase can be used as animal bedding.
Fermentation and granulation
After adding auxiliary materials and bacteria, the raw material can be fermented and granulated.
Commercial sales
The finished organic material can be packaged and sold for additional benefits.
Four advantages of the equipment
Wide raw materials
Adjustable solids discharge and humidity. Suitable for different types of manure and organic suspensions.
Economy
Low power consumption, High automation and simple start and stop control.
Durability
Stainless steel or anti-corrosion treatment increases durability and service life.
Modern design
Design reduces the risk of clogging, simplifies cleaning and maintains stable separation.
Video of the separator in operation
Existing video block is migrated after benefits, when the visitor already understands the principle and model range.
Equipment for granulating separated solids
Production lines for separated solids
Frequently asked questions about choosing a separator
Which type dehydrates material better??
The spiral separator usually provides higher solids dryness due to auger pressing.
When is it better to use an inclined sieve??
Inclined sieve is recommended for materials with fine particles and high viscosity, when continuous soft separation is required.
How to increase upload speed?
Use a pre-settler of 30–40 m³, to separate the thinner and thicker parts of the slurry before feeding it into the machine.
What can you do with the separated solids??
It can be used as organic fertilizer or bedding, and after fermentation it is sent for granulation.
Get a free quote
Submit raw material specifications and required capacity. An engineer will help you choose a spiral model or an inclined screen separator.
