What are the ways to effectively extend the service life of the disk granulator?

To effectively increase the life of the disk granulator, usually its good maintenance and proper operation are required. Subject to these conditions disk granulator can reach many years or even decades. However, the specific service life also depends on the actual conditions of use. Below are some methods, which we summed up about how in everyday use and maintenance of a disk granulator you can increase its service life.

– Follow the recommendations of the manufacturer on regular verification and maintenance.

– Check and adjust the key components of the disk granulator regularly, such as drive belts, bearings And gears.

– Clean the disk and other components, to prevent corrosion or clogging due to the remains of the material.

– Act in accordance with the operating manual and make sure, that operators know the correct methods of using equipment.

– Avoid overloads, Make sure, that the amount of material is added reasonably, to avoid disk overload.

– Before starting, check the equipment for unusual sounds or vibration and eliminate problems on time.

– If possible, use the granulator in dry and well -ventilated conditions, to reduce the effect of humidity and corrosion substances on equipment.

– Protect equipment from too high or low temperatures, since extreme temperatures can negatively affect its performance.

– Use materials, corresponding to the disk granulator, Avoid processing too abrasive or sticky materials, To reduce wear.

– Replace the worn details in time, Such as scrapers, gears and bearings, to avoid excess wear, which can damage other parts.

– Make sure, that operators undergo suitable training to understand the proper operation and maintenance of equipment.

– Write down the time and conditions of each service and replacement of spare parts to track the condition of the equipment and timely preventive maintenance.

Increase in granulator service life – This is a long process, which requires your constant attention and compliance with these service measures. This will not only help significantly increase the life of the disk granulator, but also keep it in good working condition, will increase productivity and product quality.