War crusher
War crusher It is mainly used to grind fragile materials, such as urea, complex fertilizers and others. This is a special grinder for the production of chemical fertilizers.It is more suitable for производства удобрений, чем для клеточного crushers.
В нашем дробилкe мочевины используется роликовая экструзионная резка, и два ролика вращаются в противоположных направлениях, Grinding the material into small pieces. If you have requirements for the size of crushed particles, The size of crushed particles can be adjusted within 20-70 oven. A crushed finished product has the form of crystals, Without lumps and unchanged particles. Even if there is a small amount of agglomerate, This will not block the machine and will not affect the operation of the equipment.
Urea crusher occupies a small area, and we can make it as a stationary, and mobile type in accordance with your requirements. When using the method of two -wound extrusion crushing dust at the entrance and output is small. The surface of the rollers of the urea grinder is subject to special processing, so that he can completely compress and cut the material, Grind your material very evenly and have high efficiency of crushing. This is the most suitable replacement for traditional crushing equipment.
Why do you use urea grinder to grind urea?
We all know, that urea is highly concentrated nitrogen fertilizer and refers to high -speed fertilizers of medium size. It can not only be used to produce complex fertilizers, but it will not leave harmful substances in the soil during use, And with prolonged use, there will be no adverse consequences.
Then why use the urea sprayer, To grind it? This is due to that, that unchanged fertilizer of urea cannot be absorbed by the soil, which not only leads to embezzlement of resources, but also pollutes the soil. Fertilizer with urea, crushed with a crusher for urea, can be well absorbed by the soil, So it can fully show its effect fertilizer. Most urea fertilizers, purchased by farmers, crushed. You can benefit from this business capacity. If you are a fertilizer manufacturer, You will have another way to sell, Having bought our urea chopper. Can be used after Stationary bunkers-subositors. If you do not have a fertilizer production line, You can buy raw materials at a fertilizer factory and sell it after crushing, to earn a price difference.
Why they say, that the grinder of urea is the most suitable replacement for traditional equipment for grinding?
Since the effectiveness of grinding the traditional urea grinder is low, and when grinding urea, there is no sifting, urea, which you get after grinding, has a different particle size. This not only affects your use, but it does not allow to achieve the ideal effect of crushing.
And our grinder of urea improved this, and it is specially used to grind urea. The engine of the urea grinder brings the grinding shaft rotation, and the goal of grinding urea is achieved due to the function of the grinding shaft. It has advantages of a high degree of mechanization, convenient work and good crushing effect.
And we also installed for you screens between a crushing roll and a drum. The crushed urea is sifted through sieve, And in the end, urea particles are obtained relative to a homogeneous size. You can also replace the sieve with different sieve holes in accordance with various needs in fertilizers, To satisfy the needs of various customers.
What material do we use for the manufacture of a qualified and high -quality urea chopper for you?
For a grinding roller of the urea grinder, we use for you wear -resistant alloy steel, which is wear -resistant and anti -corrosion. The spring retreat method is used for that, so that it quickly opens when other metals entered, What can extend the service life of your crushing shaft and reduce the frequency of replacement of parts.
The inside of the urea crusher uses a stainless steel lining 304, which is resistant to corrosion and significantly increases the life of the urea crusher. Besides, He perfectly solves the problems of traditional crushing equipment, such as a high noise level, A large amount of dust and a high failure frequency.
If you are not satisfied with the size of particles, crushed in a crusher, How to adjust it?
If you are not satisfied with the size of particles, crushed in a crusher, How to adjust it?
· A scream phenomenon.
After starting, sometimes during the operation of the urea chopper there is a shout phenomenon. How can you solve this problem? At this time, you need to adjust the distance between large rollers. You can adjust it, adjusting the screw on the side, And you can also simultaneously adjust the thickness of the powder. You can’t load raw materials to crush, Until the equipment will function properly.
· A fall in production.
When you suddenly find, that the performance of the urea grinder has fallen, In addition to raw materials, You need to check, Is there an additional damper in place, Does the pipeline flow, Is the pulse bag blocked, Does the electromagnetic valve work. The fan works normally, etc..
Besides, You can consult with us, to get answers to more common questions about urea grinders.
Below are the main technical parameters of the urea chopper for reference.
· Basic technical parameters.
| Type | Engine power (kW) | Gearbox | The temperature at the entrance (°C) | The angle of inclination of the installation (°) | Speed
(rpm) |
Sift performance (subject) |
|---|---|---|---|---|---|---|
| Dengue-0808 | 5.5 | ZQ250 | ≤300 | 3-5 | 6 | 1-2 |
| Dengue-1010 | 7.5 | ZQ350 | ≤300 | 3-5 | 6 | 2-4 |
| Dengue | 7.5 | ZQ350 | ≤300 | 3-5 | 6 | 3-5 |
| Dengue | 11 | ZQ400 | ≤300 | 3-5 | 6 | 4-6 |
| Dengue | 15 | ZQ400 | ≤300 | 3-5 | 6 | 6-8 |
| Dengue | 22 | ZQ500 | ≤300 | 3-5 | 6 | 7-12 |
| Dengue | 37 | ZQ500 | ≤300 | 3-5 | 5.8 | 8-15 |
| Dengue | 37 | ZQ500 | ≤300 | 3-5 | 5.5 | 8-16 |
| Dengue | 45 | ZQ650 | ≤300 | 3-5 | 5.2 | 14-18 |
Our plant is a factory, specializing in the production of equipment for the production of fertilizers. Welcome, to contact us, to configure the urea chopper or other equipment, And we also invite you to visit our plant at any time.
If you have other questions about the drum granulator, Please, Contact us.